Difference between revisions of "Pos pipe V3"

Revision as of 11:05, 6 May 2013

Syntax

Syntax: pos_pipe_V3 register1

• register1 = start of continuous registers.

4 registers.

1st register = Where pipe should be on the map where the op code is encountered a position X.

2nd register = Where pipe should be on the map where the op code is encountered a position Y.

3rd register = Where pipe should be on the map where the op code is encountered a position Z.

4th register = Gem color of the pipe. (Note: if a player is not in a gems slot then no pipe will be created to leave this at 00000000.)

Use

Used to create a pipe through scripting that will take take the players back to pioneer2/labo. Pipe will disappear upon being used.

Example

100:     leti R1, 000000F0 //Makes register 1 equal 000000F0. (x240.)
         leti R2, 00000000 //Makes register 2 equal 00000000. (y0.)
         leti R3, 00000085 //Makes register 3 equal 00000085. (z113.)
         leti R4, 00000085 //Makes register 4 equal 00000000. (Makes a red pipe. a player must be in the red gem slot or the pipe will not be made.)
         pos_pipe_V3 R1 //Makes a pipe on the floor the op code is encountered on based on the above leti arguments.
         ret 

Also see

leti, ret