Fleti fixed camera

From Unofficial QEdit Wiki Guide
Jump to: navigation, search

Syntax

Syntax: fleti_fixed_camera_V3 register1

  • register1 = Camera psychical location x co cords.
  • register2 = Camera psychical location y co cords.
  • register3 = Camera psychical location z co cords.
  • register4 = Camera look at location x co cords.
  • register5 = Camera look at location y co cords.
  • register6 = Camera look at location z co cords.

Use

Used to make a stationary camera angle using floats.


Example

//This example will make a stationary camera looking at Principal Tyrell's desk on pioneer 2. Get the values for the registers using the 3d view in qedit.


100:     fleti R1, 0 //Camera psychical location x co cords.
         fleti R2, 13 //Camera psychical location y co cords.
         fleti R3, -1982 //Camera psychical location z co cords.
         fleti R4, 0 //Camera look at location x co cords.
         fleti R5, 13 //Camera look at location y co cords.
         fleti R6, -1988 //Camera look at location z co cords.
         fleti_fixed_camera_V3 R1//Tells where to start the continuation of registry strings to be used for the camera information.
         ret 

Also see

leti, ret